Future Micro Mold Lab
com.futuremicromoldllc/lab
Tools
Exactly what the server advertised in the scan completed . Effects and capabilities are classified by Squatch from each tool's metadata. Squatch never runs tools.
- Effect: Read 8
- Effect: Delete 1
- Effect: Unknown effect 2
Showing 11 of 11 tools
| Details | ||
|---|---|---|
| pressure_drop Find where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that sec… | Effect: Delete | |
| cooling_time Find the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance… | Effect: Read | |
| gage_rr Rate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Me… | Effect: Read | |
| gate_seal Find the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of ea… | Effect: Read | |
| get_study_protocol Return the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result… | Effect: Read | |
| open_study_sheet Open an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the re… | Effect: Read | |
| plan_process_development Given the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depe… | Effect: Read | |
| process_capability Judge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk fro… | Effect: Read | |
| viscosity_curve Find the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) a… | Effect: Read | |
| cavity_balance Quantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says… | Effect: Unknown effect | |
| cosmetic_window Map which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wide… | Effect: Unknown effect |